#Mac#Beta
Version 6.2.0-8020
### Core Improvements
- The interface parameter in policies can now also take effect on DNS queries. DNS requests that match the policy will use the specified interface for resolution. (If DNS is triggered during the rule matching phase, a specific interface will not be used.)
- The network quality detection subsystem has been rewritten with more comprehensive checking logic, so notifications are no longer triggered frequently when the network is unstable.
### Ponte Server Upgrade
- Optional active standby mode: When Surge detects that the main network interface is unavailable for a period of time, Ponte will automatically switch to another interface (such as 5G USB modem or multi-WAN scenarios). At the same time, iCloud will temporarily use this interface to complete new address announcements.
- IPv6 can be configured to take effect on specific interfaces or enabled for all interfaces, suitable for multi-WAN scenarios.
- Supports cross-subnet intranet connections such as multiple VLANs.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-8010
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-8000
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7980
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7960
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7950
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7940
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7930
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7920
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7910
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7900
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed
#Mac#Beta
Version 6.1.0-7890
### New
- The Surge Gateway VM and DHCP functions have been decoupled, so now the Gateway VM can be enabled without enabling DHCP. Additionally, the configuration page for gateway mode has been redesigned, allowing direct modification of the configuration.
- Added a new rule type MAC-ADDRESS for directly matching specific clients using MAC addresses.
- The client-source-address parameter of [MITM] now supports specifying MAC addresses in addition to IPs, to address the issue of client IPv6 request address changes.
### Improvements
- Optimized the behavior of Ponte NAT traversal mode to always use local port 6208 in order to improve the success rate of traversal.
- Support automatically configuring system proxy settings when only listening with IPv6 interface.
- Improve the compatibility of IPv6 RA override with Windows clients.
- gQUIC support has been added to the QUIC Mode of Snell v5.
### Fixes
- Fixed a potential no network issue that could occur under high concurrency.
- Fix compatibility issues with large UDP packets in the new version of Hysteria 2.
Official Channel: @SurgeTestFlightFeed